Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: AmericanDemon on September 05, 2004, 09:16:04 pm

Title: WTB 2-Single Player Controllers using My PCB
Post by: AmericanDemon on September 05, 2004, 09:16:04 pm

I am interested in having a couple Happs based Controllers made using two of these for the PCB components.

http://www.dealtime.com/xPC-Pelican_PELICAN_ACCESSORIES_Universal_Arcade_Stick (http://www.dealtime.com/xPC-Pelican_PELICAN_ACCESSORIES_Universal_Arcade_Stick)

I have two if them currently and will ship to the individual who will make the box for myself including Happs joys and controls.

Title: Re:WTB 2-Single Player Controllers using My PCB
Post by: mcdo15 on September 05, 2004, 10:33:42 pm

u might want to look up snaaake...

Title: Re:WTB 2-Single Player Controllers using My PCB
Post by: AmericanDemon on September 05, 2004, 11:08:48 pm

Tried.  He's not interested in it.  Says artwork is too difficult with the amount of buttons.  I initially asked for P360s, but it would prove difficult w/o the proper voltage supplied, these don't provide the needed amount.

Title: Re:WTB 2-Single Player Controllers using My PCB
Post by: SteveJ34 on September 06, 2004, 11:36:59 pm

Quote from: AmericanDemon on September 05, 2004, 09:16:04 pm

I am interested in having a couple Happs based Controllers made using two of these for the PCB components.

http://www.dealtime.com/xPC-Pelican_PELICAN_ACCESSORIES_Universal_Arcade_Stick (http://www.dealtime.com/xPC-Pelican_PELICAN_ACCESSORIES_Universal_Arcade_Stick)

I have two if them currently and will ship to the individual who will make the box for myself including Happs joys and controls.

Do I understand you want to provide these controllers which are to be 'ripped' to use only the internal PCBs from which you then desire to have (2) single player panels built using a Happs Joy and some number of Happs buttons?

Title: Re:WTB 2-Single Player Controllers using My PCB
Post by: AmericanDemon on September 06, 2004, 11:40:36 pm

Its true.  Sorry.  Was having a hard time explaining that.  Been sick.  

Yes I will provide 2 joysticks which are to be ripped apart and then build a custom set of joysticks for me.  Using happs parts.

Title: Re:WTB 2-Single Player Controllers using My PCB
Post by: SNAAKE on September 07, 2004, 12:11:05 am

I thought you meant like those pelican real arcade that already comes with wood box.Best I can do is build 2 boxes and wire those PCB with happs competition stick.

Parts alone will end up costing me like $45-50 with artwork+plexi,etc.so we are looking at atleast $90 each.So $180+shipping for 2 singles.Can't do P360s cuz those PCB doesnt draw 5+.

Title: Re:WTB 2-Single Player Controllers using My PCB
Post by: AmericanDemon on September 07, 2004, 03:59:33 pm

Snaaake, you've done these before right?  I haven't even broke the casing apart yet, are these pushbuttons that are already wired or are these oversized controllers with the rubber pressure stuff underneathe?

Title: Re:WTB 2-Single Player Controllers using My PCB
Post by: SNAAKE on September 07, 2004, 05:30:32 pm

No they are not wired or soldered already.Yes did work on these before(*cough* almost 20 of them *cough*)

Title: Re:WTB 2-Single Player Controllers using My PCB
Post by: AmericanDemon on September 07, 2004, 06:33:52 pm

Just a few huh?  ;)