Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: General Zod on August 29, 2004, 06:20:00 pm

Title: Help w/ jPac wiring - speaker inq.
Post by: General Zod on August 29, 2004, 06:20:00 pm

Greetings,


I just have a quick question regarding the jPac and wiring the speaker connections from a jamma harness. I've tried searching the faq, but no avail.. ???

I've decided to use the speaker hack, and wire the existing cab speaker to a torn apart set of creative's ... my question is this .... Since I'm using the speaker hack to generate sound, will I still need to use the speaker + & -  wires form the jamma harness and connect to the jPac?   ( i hope that makes sense )  ;)

Thanks in advance for your help.

Michael

Title: Re:Help w/ jPac wiring - speaker inq.
Post by: SirPeale on August 29, 2004, 07:19:41 pm

Since the existing speakers should already be attached to the JAMMA harness, wire the output of the speaker amp to the speaker input on the J-PAC.

Title: Re:Help w/ jPac wiring - speaker inq.
Post by: General Zod on August 29, 2004, 10:11:28 pm

That sounds like a plan ... I appreciate your help Peale.

Thank you!  :D

Mike

Title: Re:Help w/ jPac wiring - speaker inq.
Post by: microwrx on August 30, 2004, 04:08:22 am

Remember it's only a mono connection.  If you want stereo you will have to bypass the J-PAC and JAMMA and go straight from the amp to the speakers.