Build Your Own Arcade Controls Forum
Main => Buy/Sell/Trade - non-retail => Topic started by: SpamMe on August 29, 2004, 05:36:16 pm
-
Just wondering what somebody might charge for this. I'd like to make one/have one made for my father as a gift. Nearly all of my cabinet was made with his tools, so while I could make one without too much hassle, it'd kind of ruin the surprise :)
Again, I'm just looking for the CP lid, predrilled for the standard defender layout. Prefer unpainted, with t-molding slot but not necessary. Please include shipping cost to the 95060 zip.
-
You may want to specify what you would be using for a joystick, as that would change how it is drilled.
-
Not sure, haven't found a suitable candidate yet. Any suggestions?
-
Wico balltop, long handle. Cut a slot in the wood rather than a circle. You will have to run the reverse button through the joystick base. This is how my Defender is and it is solid.
-
Wico balltop, long handle. Cut a slot in the wood rather than a circle. You will have to run the reverse button through the joystick base. This is how my Defender is and it is solid.
Pics please.
-
I am almost certain I posted pictures of this somewhere here, if you can't find them, then I might photograph it again.
-
Cool