The NEW Build Your Own Arcade Controls

Main => Main Forum => Topic started by: setch_uk on August 30, 2002, 03:33:31 pm

Title: Building Your Own Supergun
Post by: setch_uk on August 30, 2002, 03:33:31 pm

Hi One & All

Really want a Jamma Cabinet but space and money will not allow   :'(

Ok my Question for all you folks

I really want to build my own Supergun, want the challenge rather than just forking out a wedge on a pre-built one.

What im after is some plans to make one. not really found a good one out there.

So some links would be nice  8)

Also i have read about getting 6 button jamma setups you need an extra loom (i think thats what its called) but cant find out any info on that either. i know there is not enouth pins on the figure boards etc

so any help would be great

Many Thanks

Setch

Title: Re:Building Your Own Supergun
Post by: Dave_K. on August 30, 2002, 08:43:31 pm

You may want to ask this over on www.gamesx.com forums (I've seen them discussing a homemade supergun a couple times).

-Dave

Title: Re:Building Your Own Supergun
Post by: CthulhuLuke on September 01, 2002, 05:34:48 am

Yo,
Not too long ago, there was an example that was a Supergun MVS box thingy, and he had steps of how to make your own, I'm sure you could modify this to have it accept Jamma or whatever, but this should help.  http://web.njit.edu/~jal0737/
 -Good Luck
   -CthulhuLuke

Title: Re:Building Your Own Supergun
Post by: BobA on September 02, 2002, 03:57:17 pm

Always a good source of info for building a supergun.

See this link.

http://cps2shock.retrogames.com/jamma.html (http://cps2shock.retrogames.com/jamma.html)

Hope it helps.


PS NullbOy -  I think you are thinking a different type
                     of Supergun.

BobA