Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: koolmoecraig on August 22, 2004, 11:53:31 pm

Title: ArcadeVGA Drivers Needed ********
Post by: koolmoecraig on August 22, 2004, 11:53:31 pm

Hello Everyone,

Can someone please send me or tell me where to find the drivers for my 7000 based ArcadeVGA card?

Thanks,
Craig

Title: Re:ArcadeVGA Drivers Needed ********
Post by: Knoxximus on August 23, 2004, 12:21:44 am

Ummmmm....I dunno....maybe you could tryyyyyyyyyyy...*scratches head*...OH YEAH!

http://ultimarc.com

 ::)

Actually, since you are going to need the coveted CD, you might want to e-mail Andy and see maybe if he could email you a zipped file or something.....or update his downloads.

Title: Re:ArcadeVGA Drivers Needed ********
Post by: Goz on August 23, 2004, 12:30:16 am

Check PM

I put a copy of the 7000 chipset drivers for all OS'

I am dangerously near my monthly max, else I could make it a publically available link.

I really need to get a better host.

-Goz

Title: Re:ArcadeVGA Drivers Needed ********
Post by: koolmoecraig on August 23, 2004, 01:05:03 am

Thanks man!

I did email Andy. I'm just impatient.

by the way, i can't even install the drivers because when I hooked up my arcadevga card to my 19" Wells Gardner K4951 monitor and all I get is horizontally rolling picture. with a "garbled" image. I can see the general Windows colors while its booting up, but it constantly rolls with a completely screwed up picture.

I have tried reversing the horizontal and vertical inputs, but it's still pretty much the same.

This is an original monitor from a Q*Bert machine, so there is no way that it is H/V sync, is there? When I pulled the orginal Q*Bert wires from the monitor board, the Horizontal and Vertical definately had different inputs.

Any ideas?

Please help. I am sooo close!

Title: Re:ArcadeVGA Drivers Needed ********
Post by: Goz on August 23, 2004, 01:38:49 am

Have you tried adjusting VSync? also could be the refresh rate, etc.. I imagine.  Is the cable attached to the center head on vid card?

-Goz

Title: Re:ArcadeVGA Drivers Needed ********
Post by: koolmoecraig on August 23, 2004, 02:18:37 am

Quote from: Gozur on August 23, 2004, 01:38:49 am

Have you tried adjusting VSync? also could be the refresh rate, etc.. I imagine.  Is the cable attached to the center head on vid card?

-Goz

Well, There is no VSync adjustment. Just a bunch of size and hold adjustments. The cable IS attached to the center. Do I adjust the refresh rate if I can't get an image on the monitor?

Thanks again!