Build Your Own Arcade Controls Forum

Main => Software Forum => Topic started by: DaveJ-UK on August 22, 2004, 03:14:50 pm

Title: Project64 Full screen immediately after loading rom?
Post by: DaveJ-UK on August 22, 2004, 03:14:50 pm

Can anyone tell me how to get Project 64 to go full screen immediately after loading a ROM? (I'm using MAMEWAH)

Clicking Options > Full Screen / pressing ALT+Enter gets old very quickly :(

I've gone through all the options and I can't find any command line params in the help.

Title: Re:Project64 Full screen immediately after loading rom?
Post by: Halo on August 22, 2004, 04:39:39 pm

Dave ..  this is from memory, so don't quote me on this. I think what I did was open P64 directly from the .exe, then right click to bring up the options .. then set full screen from there. Then, close it down and try it from Mamewah. I'm using the same combination, and Im 99% sure this is how I did it.

TJ

Title: Re:Project64 Full screen immediately after loading rom?
Post by: DaveJ-UK on August 22, 2004, 06:17:44 pm

I'm sure I did this, but i'll give it another try. In fact, I'm quite certain it doesn't work because I've launched a game (from MAMEWAH), played it for a bit, hit escape, loaded another game, and it's windowed again!. I'll give it another try all the same.

Title: Re:Project64 Full screen immediately after loading rom?
Post by: wj2k3 on August 23, 2004, 09:32:43 am

Under the 'Options' menu, choose 'settings...'   (or use ctrl+T)

Then select the 'Options' tab

Then check the box next to "On loading a ROM go to full screen"

click "OK" and you are good to go.

-wj2k3

Title: Re:Project64 Full screen immediately after loading rom?
Post by: DaveJ-UK on August 23, 2004, 01:21:05 pm

Thanks a ton wj :)

I was looking under video options; didn't even see that menu! Opticians first thing in the morning then :D