Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: RayB on August 17, 2004, 11:59:55 pm

Title: Resistors and Atari lit Cone Buttons
Post by: RayB on August 17, 2004, 11:59:55 pm

I searched and couldn't find anything on hooking up Atari lit cone buttons to a J-PAC or I-PAC.

Ultimarc does not specify what kind of LED their own LED harness uses. His diagram DOES show that he uses a 220R resistor. But I can't compare properly without know what voltage the LEDs are...

I think Atari cone buttons use 2v lights. I remember at one point finding a site that explained how to figure out what resistors to use for various applications but I cannot find that web page.

Anyone have any URLs that help?

~Ray

Title: Re:Resistors and Atari lit Cone Buttons
Post by: fredster on August 18, 2004, 12:09:26 am

Maybe just hook it up to a 10K pot and measure the resistance when you got it to light up from a 5V power source?

Title: Re:Resistors and Atari lit Cone Buttons
Post by: SteveJ34 on August 18, 2004, 12:17:33 am

Quote from: RayB on August 17, 2004, 11:59:55 pm

......
Ultimarc does not specify what kind of LED their own LED harness uses. His diagram DOES show that he uses a 220R resistor. But I can't compare properly without know what voltage the LEDs are...
.....
Anyone have any URLs that help?

Here's one:
http://www.bit-tech.net/article/68/

A google of "led resistor calculator" turns  up  many more....

Title: Re:Resistors and Atari lit Cone Buttons
Post by: ChadTower on August 18, 2004, 11:24:50 am

When you figure it out, could you post the answer here?  I'm going to do it in the near future and I'd think many other people will eventually run into it.

(and I don't have the knowledge to do what was described above)

Title: Re:Resistors and Atari lit Cone Buttons
Post by: OSCAR on August 18, 2004, 12:09:36 pm

This has topic come up a number of times.  Below are just a couple of threads about it.  If you do a search for 'Atari' and 'LED' on these forums, you can find additional threads:

http://www.arcadecontrols.org/yabbse/index.php?board=1;action=display;threadid=4338;start=msg27132#msg27132

http://www.arcadecontrols.org/yabbse/index.php?board=1;action=display;threadid=4195;start=msg25882#msg25882

Title: Re:Resistors and Atari lit Cone Buttons
Post by: RayB on August 18, 2004, 01:31:49 pm

Thanks. I did use the Search first, but it came up with a couple unrelated threads. (I searched for "Atari lit button". heh Too many words I guess.)

Now does anyone know which tabs on the button are for the switch and which are for the LED?? :-D There sure are alot of tabs on these babies.

PS: Aluminum cone buttons look SO COOL when polished up.