Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: PixelCloud on July 30, 2004, 10:49:21 pm

Title: Possible solutions for disabling buttons on a CP
Post by: PixelCloud on July 30, 2004, 10:49:21 pm

So say you have a spinner with a couple buttons which are wired to the same buttons as say p1 first and 2nd button for the joystick

could you wire a switch that would switch between which ground wire is hooked up ?

so when you wanted to use  the spinner configuration the swtich would disconnect the ground wires for the player 1 joystick configuration..

Title: Re:Possible solutions for disabling buttons on a CP
Post by: Kremmit on July 30, 2004, 11:15:15 pm

Yes, that should work.