Build Your Own Arcade Controls Forum
Main => Everything Else => Topic started by: NIVO on July 30, 2004, 06:17:28 pm
-
hey guys, im looking for a 9-pin connector extension cable(1 end female, 1 end male) to move my subwoofer further away. I have attached a pic below of a quickie diagram of the pin orientation. It uses a ps2 housing, there is NO square black piece like in mice and keyboards. Anyone that has a logitech/labtec 2.1 or higher speaker set knows what this is. Just would like to get an extension cable. Thanks.
-
Umm, where's the pic?
Offhand I'd check Mouser or Newark Electronics.
-
whoops LOL, sorry bout that, post is fixed with pic.
-
http://www.mouser.com/catalog/619/777.pdf (http://www.mouser.com/catalog/619/777.pdf)
has what I believe is the right connectors. Kobiconn part number 161-2609 is the jack, where 171-2609 is the plug. Cost is about $1.50 each, though you'd need to wire the cable up yourself.
http://www.action-electronics.com/ppdin.htm (http://www.action-electronics.com/ppdin.htm)Another source, Mini DIN connectors are towards the bottom of the page.
http://us.creative.com/products/product.asp?category=13&subcategory=58&product=10374 (http://us.creative.com/products/product.asp?category=13&subcategory=58&product=10374)
Something else that might work. Creative offers a 2 meter cable with male 9 pin Mini DIN connectors on each end. If your existing cable unplugs from both ends, you could concievably replace it with this cable, assuming it's longer than your existing cable.
-
thanks tailgunner, appreciate the linked info
-
Not a problem, I was bored. ;)