Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: GCS on July 30, 2004, 12:13:27 pm

Title: 2 gutted Arcade Cabs in Richmond, VA MUST BE GONE BY SAT 7/31/2004
Post by: GCS on July 30, 2004, 12:13:27 pm

I Have 2 cabinets:

1. Is an old Arkanoid cabinet (19" monitor size).  It has been gutted and completely sanded down.  Basically just about ready for primer and paint.  Comes with monitor harness, old CP, smoked plexi, and working coin mech.  NO MONITOR.  There is one small part on the top of the marquee area that got a little damage in transport but not bad.

2. Is an old MKII cabinet (currently has relief pitcher decals on it) but its the typical 25" Dynamo cabinet.  Its in pretty decent shape.  It has been gutted (all but the 25" monitor).  It has not been sanded down yet.  It will come with the cabinet, 25" WG monitor, JAMMA harness, Isolation transformer, Relief pitcher boards, wood monitor bezel, all other wiring that was in the cabinet, coin door, I will also throw in the buttons and joysticks from the cabinet (pretty dirty though).  THERE IS NO CP!!  It was nasty and rusted so it went in the dumpster.

I would like $200 for both.  I will and can deliver up to an hour away.

**These are located at my dads and he decided to tell me at noon today they have to go by tomorrow.

Best way to reach me is via email at gshanes@comcast.net

Thanks

Greg
 
 
 

Title: Re:2 gutted Arcade Cabs in Richmond, VA MUST BE GONE BY SAT 7/31/2004
Post by: SirPeale on July 30, 2004, 04:16:01 pm

Arkanoids were conversion only, do you have any pics?

Title: Re:2 gutted Arcade Cabs in Richmond, VA MUST BE GONE BY SAT 7/31/2004
Post by: RayB on August 01, 2004, 11:38:19 am

Quote from: Peale on July 30, 2004, 04:16:01 pm

Arkanoids were conversion only, do you have any pics?

yeah i was thinking the same thing. That Arkanoid will have been something else before that. (but it's already sanded down........)