Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: atog on July 27, 2004, 02:36:14 pm

Title: how much tmolding for a midway cocktail?
Post by: atog on July 27, 2004, 02:36:14 pm

Ive just about got everything ordered for the cocktail, but I don't have the measurements for how much tmolding I am going to need, and it would be nice to have it already ordered and in hand when it comes time to install it.

Anybody know how many feet of 3/4 inch and 1 inch tmolding go into a Midway/Kyle Lindstrom cocktail cab?

Title: Re:how much tmolding for a midway cocktail?
Post by: MonitorGuru on July 27, 2004, 02:45:10 pm

I own an original MsPac cocktail (dual coin drop door).

IIRC I ordered 10 feet of 1", but only used 9 feet (or ordered 10 and was shiped 10.5 and used 9.5...as I had at least a foot left over)

I believe I used appx 14' of black leather 3/4".    (30" per upright, 24" per control panel)

But it has been about 2 years since I ordered and installed.   I guarentee if you order 10' of 1" and 20' of 3/4" you'll have enough.