Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: krion on July 24, 2004, 07:16:26 pm
-
This is the smallest they have in my area w/o special ordering it. I've checked everywhere hehehe. Is this too big for 3/4" t-molding?
-
yes. You will have to use hot glue or something to hold the t molding in place.
-
Yes 1/8 is too big. Check saw, blade sharpening type shops. I couldn't find one at all the regular places (hardware stores, tool warehouses, etc). It is after all a fairly specialty type of a bit. And the sharpening shop I went to had them and several other strange type blades and bits for routers...
-
Check this place out. They have 1/16" 3 wing slot cutters with the arbor for only $16.00 and there appears to be no shipping if your in the US.
http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bt_slot.html :)