Build Your Own Arcade Controls Forum

Main => Artwork => Topic started by: justinf951 on July 24, 2004, 10:24:44 am

Title: help with artwork
Post by: justinf951 on July 24, 2004, 10:24:44 am

I am nearing completion of my arcade cabinet, unfortunatly my artistic abilities are not up to par with my ability to construct a cabinet.  I am painting my cabinet "Ace of Spades" black with chrome T- Molding.  The paint is the inspiration for the name of the cab.  I am planning on calling the cabinet "The Ace of Spades."  However I need a marque and some side art.  I am just looking for something simple not too complex.  If anyone can help I would be very grateful.  Thanks.

Title: Re:help with artwork
Post by: walls83 on July 24, 2004, 02:25:39 pm

check this ace of spades out


http://media01.cgchannel.com/images/gallery/1137/2/fullimg.jpg

Title: Re:help with artwork
Post by: justinf951 on July 24, 2004, 02:30:40 pm

That is some nice artwork but I am looking for something a little simpler.

Title: Re:help with artwork
Post by: walls83 on July 24, 2004, 02:47:35 pm

what are the sizes you need?

Title: Re:help with artwork
Post by: justinf951 on July 24, 2004, 03:18:52 pm

The marque is about 26" by 5.5"
And the side art should be no bigger than 21" by 30"
I plan on buying a couple packs of playing cards and glueing the ace of spades cards onto the cp and bezel and I might throw a few on the sides as well.  Thanks