Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: sfetaz on July 21, 2004, 10:23:39 pm

Title: Carving bigger hole for trackball, best method?
Post by: sfetaz on July 21, 2004, 10:23:39 pm

I have a Slikstik quad blank.  The trackball hole is configred for the hexagonal shaped trackballs like this one:

(http://www.happcontrols.com/images/50/56010011_color.jpg)

I have a betson imperial trackball which is shaped like an oval:

(http://www.members.shaw.ca/bakaye/tballhack.htm)

The hole is not large enough for the Betson Trackball, so I am wondering what you guys think is the best method to make the hole large enough.  I have a dremel.

Title: Re:Carving bigger hole for trackball, best method?
Post by: Xphile on July 21, 2004, 11:14:07 pm

Hammer and chisel and a free hour or so..should be pretty easy to mate it up nicely...