Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: rob1234 on July 12, 2004, 04:18:09 pm

Title: Wirring diagram needed for turbo sit down cab steering wheel
Post by: rob1234 on July 12, 2004, 04:18:09 pm

I need the wirring diagram for a turbo sit down cab steering wheel. Anyone out there install an oscar mouse hack on one? If so I could use some info on how to do it and maybe some pics. THANKS!

Title: Re:Wirring diagram needed for turbo sit down cab steering wheel
Post by: lostboy4480 on July 13, 2004, 04:37:47 am

What part do you need a diagram for ? I have a sit down turbo cab in my garage..  Will see if I can take pics of the wiring of the wheel tomorrow, if I get in from work at a reasonable time

Title: Re:Wirring diagram needed for turbo sit down cab steering wheel
Post by: rob1234 on July 13, 2004, 10:24:19 am

i have the wires all connected right now, I need to know what each wire is for so I can cut them and hook up an oscar mouse hack for mame use.

Title: Re:Wirring diagram needed for turbo sit down cab steering wheel
Post by: NoOne=NBA= on July 13, 2004, 12:19:43 pm

It would be alot easier to just replace the optic board with one of Oscar's.
That's what I did with mine.

I'm not sure that the original can be used; and, if it can, it's probably more trouble than it's worth.
That seems to be the norm with original optic boards.
They are much more complicated than the replacements from Oscar, and are designed to interface to the original boards, rather than a mouse hack.