Build Your Own Arcade Controls Forum

Main => Artwork => Topic started by: Hoopstar on July 04, 2004, 07:50:27 am

Title: Centipede bezel size..
Post by: Hoopstar on July 04, 2004, 07:50:27 am

Can anyone give me the dimensions of the Centipede bezel size - not the actual cutout but rather the entire size as I need to give these measurements to ArcadeGraphix and he is not sure if the measurements on his website are correct and I have not started construction on my Jakobud based cabinet...

Title: Re:Centipede bezel size..
Post by: daeven on July 07, 2004, 10:04:49 pm

Are you talking the glass in front of the monitor?  If so, I should have one for a Centipede cabinet in a few days.  I'll measure it when it shows up!

Title: Re:Centipede bezel size..
Post by: Peter Baluk on July 26, 2004, 11:40:22 pm

Quote from: daeven on July 07, 2004, 10:04:49 pm

Are you talking the glass in front of the monitor?  If so, I should have one for a Centipede cabinet in a few days.  I'll measure it when it shows up!
[do you still need the sizes of bezel.Can check in mornin and let you know.Peter/quote]

Title: Re:Centipede bezel size..
Post by: Hoopstar on July 29, 2004, 05:45:51 am

yeah, just the glass in front of the monitor....

Title: Re:Centipede bezel size..
Post by: daeven on August 02, 2004, 03:32:55 pm

Oops!  I forgot about this question.  I've got the glass installed at home.  I'll measure the glass this evening.

Title: Re:Centipede bezel size..
Post by: daeven on August 02, 2004, 09:14:18 pm

The glass size is 23-11/16" x 23-11/16" edge-to-edge.  Yes, it is a square.  The artwork is not printed all the way to the edge, perhaps a 1/16" form each edge since the edges are rounded slightly.