Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: the3eyedblindman on June 14, 2004, 03:24:24 pm
-
I have a 19 inch tv ill be using for my arcade, i was going to use a 27 inch but i won this for free. Will a happ controls bezel (19 inch) fit around a 19 inch tv, or are arcade monitors and tvs different in size?
-
It's my understanding they are the same. However, the TV will have its own built-in bezel to contend with. You'll likely have to remove it from the case.
-
Anyone else know that has done this, or just knows the answer period?
-
I used a 27" bezel w/ a 27" TV. It fit just fine. I even left the TV bezel on. There is a very tiny gap between the happ bezel and the tv but I don't mind because I think it is difficult to notice. I did not really want to remove the TV Bezel. If you remove the TV bezel, it should fit even better.
Picture of the bezel and gap:
http://webpages.charter.net/rbecker5/images/sideView.jpg (http://webpages.charter.net/rbecker5/images/sideView.jpg)
Just so you know, the shipping for the Happ bezel is rather expensive.
-
When I got my 19" happ bezel I put it up to my 19" TV (wasn't using tv, just checking it out). Seems like a perfect fit but only if you were to remove the TV bezel/case...probably depends a little bit on the tv.
-
my 25" happ bezel fits my 25" tv a treat without removing case.......... just a pity that for the cab the tv is 24" - bugger, just cut it and 'amended' it - with smoked glass you cant see it!
-
Just so you know, the shipping for the Happ bezel is rather expensive.
How much is shipping? In the $10-$15 range?
-
im in the uk. shipping cost me