Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: Lave Laar on June 10, 2004, 06:00:00 am

Title: Dead Hantarex MTC 9300 monitor
Post by: Lave Laar on June 10, 2004, 06:00:00 am

Yesterday I was using my arcademachine. Suddenly the screen goes black and the just a ticking sound comes from the back.

At back of the hantarex psu there is a label  "Supplies ok" and a red light for each +5 +12 -12 -5.  When i turn on the power the +5 +12 and -5 are flashing and making the ticking sound.  I suspect a fuse, but I like to be certain before I start fiddling around in there. The light behind the marquee is working.

So anyone have a solution for this ?

Title: Re: Dead Hantarex MTC 9300 monitor
Post by: Bally on March 10, 2012, 10:08:41 am

Same problem here and no one can help....the info i found are "they are crap" and "stay away"  :banghead:

Title: Re: Dead Hantarex MTC 9300 monitor
Post by: grantspain on March 10, 2012, 10:53:22 am

is this the chassis in the plastic box?

ticking is down to the power supply in trip because a short,normally on hanty monitors its down to bad caps,shorted hot,maybe a high voltage poly cap on the hot collector,sometimes the flyback