Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Evilpenguin on June 03, 2004, 07:02:55 pm

Title: Help with Coin Door
Post by: Evilpenguin on June 03, 2004, 07:02:55 pm

Hi all

I was wondering if someone could tell me what parts exactly are missing in order to make the door functional.  

Thanks

Jason
(LEX)

Title: Re:Help with Coin Door
Post by: crashwg on June 03, 2004, 07:22:55 pm

Coin mechs

Title: Re:Help with Coin Door
Post by: Felix T Cat on June 03, 2004, 07:24:54 pm

And something to plug that connector in the bottom right to.
 ;D

Title: Re:Help with Coin Door
Post by: Evilpenguin on June 03, 2004, 07:31:46 pm

How does the coin mech attach to that?

Jason
(LEX) :o

Title: Re:Help with Coin Door
Post by: Xphile on June 03, 2004, 09:34:53 pm

a coin mech (shown in pic alone and installed) is held by two screws, bolts, or spring steel prongs - in place-  and direct the coin either down to trip the bottom switch, or out through the coin return..
The yellow arrows in this pic show the screws and where they go on your existing parts..

Title: Re:Help with Coin Door
Post by: Ken Layton on June 04, 2004, 02:39:30 am

Evilpenguin:

Your door is a Coin Mech brand. It is indeed missing the two coin acceptors (a.k.a. coin chutes). Any brand of coin acceptor will fit this door.

Title: Re:Help with Coin Door
Post by: Thenasty on June 04, 2004, 01:19:52 pm

if interested in Coin Mechs that will accept any type of coin or tokens, check out this thread.

http://www.arcadecontrols.org/yabbse/index.php?board=2;action=display;threadid=19200