Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: shaneMacgowan on May 21, 2004, 08:56:51 am

Title: coin doors uk?????
Post by: shaneMacgowan on May 21, 2004, 08:56:51 am

Hi everyone!
I think i understand that i need a coin door and a coin mech to go in the door for my arcade machine. Its just the switch that the correct coin entered triggers that needs to be connected to the ipac board???  
Thats fairly straight forward - but are there any tutorial sites out there for adding a coin door with the ipac card?

Also, where the hell can i get the coin door and mechanism in the uk?

Thanks in advance!  ;)

Title: Re:coin doors uk?????
Post by: mmmPeanutButter on May 21, 2004, 09:02:14 am

The BYOAC FAQ.  Stuff that gets asked all the time is likely answered here. (http://www.arcadecontrols.org/yabbse/index.php?board=1;action=display;threadid=5361)

Title: Re:coin doors uk?????
Post by: Minwah on May 21, 2004, 01:30:19 pm

Since you are in the UK, I will step in as most people here are in the US:  In the UK it is VERY common for machines to have coin mechs which can accept multiple coin types (10p, 20p, 50p,

Title: Re:coin doors uk?????
Post by: DaveJ-UK on May 21, 2004, 04:05:38 pm

I have a 10p/20p/50p/

Title: Re: coin doors uk?????
Post by: barry on December 02, 2005, 08:44:54 am

Hey guys. I have a Coin Controls Credit Control unit. I have found the dip switch settings so i'm OK with that but I can't seem to get it work with my JPAC.
Should just connecting the JAMMA edge connector to the JPAC be enough or do I need to reroute some wires somewhere?
The coin mech lights up and is powered by a PSU in the cab.
I don't want to damage the JPAC, is there any danger in connecting it?
All advice gratefully received.

Title: Re: coin doors uk?????
Post by: Hippo on December 02, 2005, 11:16:33 am

If you wanted to do it without mechs you could do what I did here http://www.aphdesigns.co.uk/arcade/