Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: mmmPeanutButter on May 19, 2004, 10:28:01 am
-
I'm looking for high resolution photos of the centipede cpo. I would prefer to have a few photos of the cpo before it is applied to the control panel (ie. flat).
The reason I ask...
I have the vector file (from the art repositry) and I just want to confirm that everything is ok. The spacing looks a little off (from right to left) and in the file, the blue on the underside portion of the control panel isn't there.
Just want to make sure that the sizing and orientation is perfect before I send it out to be printed.
Just send me a PM, or post the pics.
Thanks.
-
Not really high-res, but it's what I have.
-
I just found this one...
(http://www.arcadeshop.com/pics/cen-cpo.jpg)
but see how the distance from the green and the edge on the right and left are the same? This is not the case on the vecort file...
It's got me all scared now... I woundn't want to send it out and get it back all messed up.
If somebody can take a bigger picture (just like this one though) that would be fantastic!
-
Just change the vector file to what you want. If you have specific measurements to meet, just change them in the vector file, or ask someone to do it for you.
That's a big reason we made all of these things into vector files, so users could change to suit. I don't think we made any claims about these files being totally accurate like a repro (though we certainly try) but if you have the original CPO and you are trying to match it, I would suggest creating a print off of your own printer, then paste it together, and drop it on the CPO to test the sizing. That would work much better than worrying about it.