Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: myspacee on July 27, 2002, 08:16:31 am

Title: same newbe same question....
Post by: myspacee on July 27, 2002, 08:16:31 am

hello,
im italian, in my country all that regard cabinet
and his configuration is sci-fi.

All other sites link there. I found an old cabinet,
replace monitor and board, with 21" monitor and
pentium III 800. all works fine BUT:

the mame dos (pure) control are orrendous,
and i want to bypass windows. there is a solution
or documentation to study and solve this prob?

is possible to connect player 2 to parallel port with a
cable and a software that recognize input?

sorry 4 engl. and the stupid (SAME) question ?

thank you :)  

Title: Re:same newbe same question....
Post by: planetjay on July 27, 2002, 01:23:34 pm

You will probably want to use the IPAC. See: http://www.ultimarc.com/ipac1.html (http://www.ultimarc.com/ipac1.html). Everyone that has had one has spoken very highly of it.

As for the english... try http://world.altavista.com/ (http://world.altavista.com/) they only convert Italian to English but then you and convert English to other langauges.

Babel Fish Translation, In Italiano:
Per quanto riguarda... la prova inglese [ url]http://world.altavista.com/[/url ] convertono soltanto l'italiano in inglese ma allora in voi e convertono l'inglese in altri langauges.  ;)