Build Your Own Arcade Controls Forum
Main => Buy/Sell/Trade - non-retail => Topic started by: Wade on May 12, 2004, 12:04:04 pm
-
Various parts for sale or trade. Some things probably aren't worth shipping, I live in Charleston, WV if you'll be in the area, and I travel neighboring areas occasionally so I might be able to drop off. I have higher res pictures of all the following if anyone needs to see them, these are just smaller so I don't use up my limited web space.
Make offer for $$$ or trade:
Images at:
http://webpages.charter.net/wadelanham/arcade/forsaleortrade/
2-way joystick 1.jpg
2-way joystick 2.jpg
* Both of these are 2-way joysticks from a Space Invaders cocktail game. One is a little worn around the post and one isn't. $10 each.
25inchNanaoCGAEGA.jpg
25inchNanaoCGAEGA2.jpg
* Broken Nanao 25" CGA/EGA switchable. Tube is fine, has some light scratches on the face of the tube. Picture was perfect, then a ground wire touched the bottom of the chassis and broke it. Ken Layton says this would be about $100 to fix. $75
25inchWellsEGA.jpg
25inchWellsEGA2.jpg
* Broken 25" WG K8000 series, EGA. Tube appears to be fine, I had a good colors with the horz out, sent it off for repair and it hasn't worked since I got it back. I have some spare parts for it too. Ken Layton says he has never worked on this model before. $50
3inch trackball.jpg
3inch trackball2.jpg
* Decent condition white 3" trackball. I bought a brand new black one. This one has some small nicks, scratches and stains on it. $4 SOLD
Taito SI harness.jpg
Taito SI transformer..
Taito SI unknown.jpg
* Some Taito SI cocktail parts. A main harness, a trans/power supply, and some other part (test switch and something else?) Prefer trade.
* Virtua Racing plastic seat (see http://webpages.charter.net/wadelanham/arcade/vrtwin/index.html) Not in very good condition. Free to anyone who wants it, but you will have to pay for shipping if you want it shipped, I'm sure it won't be cheap.
I'm looking for some Taito cabinet parts, Jungle King marquee, CP, harness, etc. Open to trade suggestions.
Email to wadelanham at hotmail.com for quickest reply.
Thanks,
Wade
-
How much for the dead chassis on that Nanao monitor?
Coleman
-
How much for the dead chassis on that Nanao monitor?
Coleman
Hmmm, how about $50? Of the dead monitors I have this is the one I'd prefer to keep (switchable).
Wade
-
I am emailing you about that trackball. Thanks.
-
How much for the dead chassis on that Nanao monitor?
Coleman
Hmmm, how about $50? Of the dead monitors I have this is the one I'd prefer to keep (switchable).
Wade
I actually only need one of the pots on the chassis...since a new 8-liners chassis would only be $100, I have to pass. Thanks though!
Coleman
-
Yeah, $50 is a lot just for a pot. :) I may eventually go with an 8liners chassis for these monitors too, if I ever find a use for them that isn't EGA (which is what I really need for backups for my Virtua Racing).
Wade
-
Bumping this.
-
just bumping!
-
Wades a great seller and honest guy.
Good transaction bump!