The NEW Build Your Own Arcade Controls
Main => Buy/Sell/Trade - non-retail => Topic started by: Lance on May 09, 2004, 03:20:48 pm
-
Does anyone have any carriage bolts that will fit an Ultimarc 2 1/4" trackball? Local hardware stores only sell 1/4" carriage bolts which are too big.
Happ sells the right ones but min order size is like 100 or something. Does anyone have some for sale? I think I need ones 3" in length and I need 4.
thanks
lance
-
I have a hardware store that carries the size you will need they are 5/16. I can get you 4 of them if you want to send me money for shipping a buying them. I have used them for all my joysticks they are good.
let me know if you are interested email me
-
I think the ones I am looking for a 3/16", at least that is what bob roberts sells so I assume those are the proper size. I'd order them from bob but shipping would be $7.50 for 4 bolts :(
-
well are they the same size you use for the joysticks? If so 5/16 will work fine
-
My joysticks just have studs welded to the bottom side of thte panel. I want to get the smalled carriage bolts I can since I don't want larger heads of the bolts on the control panel. Thanks anyways.