Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: timsatari on April 29, 2004, 05:09:44 pm

Title: Where's the 'Horizontal position' changer on my monitor...
Post by: timsatari on April 29, 2004, 05:09:44 pm

yes, me again...now I'm up and running, I need to get the image on the monitor slightly to the left as it's too far right...only problem is, is that I can't locate the knob to adjust the horizontal position! There's everything knob but this one on the board...

Title: Re:Where's the 'Horizontal position' changer on my monitor...
Post by: timsatari on April 29, 2004, 05:10:34 pm

and here's the knobs on the back of the monitor....

Title: Re:Where's the 'Horizontal position' changer on my monitor...
Post by: timsatari on April 29, 2004, 05:16:03 pm

sorry - the knobs not quite as clear as I thought. The one's I need appear to be on the right side of the board, and from the far right they're 'V. position'; 'V. hold', 'v. size', '.h phase', h.hold'. It's a Nanao monitor too..the pictures wuite nice for an older tube.

Title: Re:Where's the 'Horizontal position' changer on my monitor...
Post by: Ken Layton on April 29, 2004, 05:34:30 pm

You'll need to adjust the "H Phase" and "H Hold". They interact with each other.

Too bad it's a Nanao monitor---I don't like them.

Title: Re:Where's the 'Horizontal position' changer on my monitor...
Post by: timsatari on April 29, 2004, 10:01:33 pm

Thanks Ken - fixed!