Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: krick on April 28, 2004, 07:46:25 pm

Title: Stacking Ultimarc I-PAC / J-PAC / Opti-PAC boards
Post by: krick on April 28, 2004, 07:46:25 pm

I was wondering if anyone has had any experience stacking any of the Ultimarc interface boards.

I have a J-PAC and an I-PAC2.  When I ordered them, I was under the impression that they could be stacked when mounted.  However the boards are different sizes and the mounting holes don't line up.

Which if any, are capable of stacking?

Title: Re:Stacking Ultimarc I-PAC / J-PAC / Opti-PAC boards
Post by: microwrx on April 28, 2004, 08:05:18 pm

I don't know that they can be stacked.  I'm pretty sure they are all different sizes.  They can be daisy chained together so they all work off the same port on your PC but I've never heard anything about physically stacking them on top of each other.

Title: Re:Stacking Ultimarc I-PAC / J-PAC / Opti-PAC boards
Post by: Apollo on April 28, 2004, 10:10:38 pm

I-PAC & Opti-PAC stacked

http://www.ultimarc.com/images/both.jpg

J-PAC can't be stacked too easily as the board is a different size.

Title: Re:Stacking Ultimarc I-PAC / J-PAC / Opti-PAC boards
Post by: microwrx on April 29, 2004, 09:03:38 pm

Well there you go!  Still don't know why you'd bother as they aren't that big anyway but it isn't my cab I suppose.....