Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Shieldwolf on April 11, 2004, 08:55:26 pm

Title: Hangstrom 72 encoder and ME4 help
Post by: Shieldwolf on April 11, 2004, 08:55:26 pm

Almost there. I finished wiring up my cab this weekend except for the oscar model 3 spinner and the happs trackball. I figured I needed to remove the wires from my happs trackball to attach the ones for the me4, but I'm really confused about how I'm supposed to wire oscar's model three. The prongs on the model three are too close to use what hagstrom sent me. If anyone here has done it and could give me some help. That would be great. Its a bit complicated and I'm just having a time trying to get my head around it.

Thanks for the help

SW

Title: Re:Hangstrom 72 encoder and ME4 help
Post by: OSCAR on April 11, 2004, 09:32:52 pm

I replied to your email yesterday.  I see that you provided more info in this post than was than in your original email to me, and I pm'd you some additonal suggestions to help you out.