Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Hoopstar on April 07, 2004, 07:47:54 am

Title: Centipede CP dimensions
Post by: Hoopstar on April 07, 2004, 07:47:54 am

Just wondering if someone had the dimensions of the STOCK Centipede Control Panel  (ie. 'X' x 'Y')

Title: Re:Centipede CP dimensions
Post by: Lance on April 07, 2004, 12:07:35 pm

I know off hand that it is 23.75" wide, not sure of the height though

Title: Re:Centipede CP dimensions
Post by: Larry Smith on April 07, 2004, 01:53:16 pm

the top is 7", the front is 3" and the bottom is 5 5/8".
The measurments are appoximate because it is rounded from top to front and from front to bottom.
It is 23.75" wide.

Title: Re:Centipede CP dimensions
Post by: Hoopstar on April 07, 2004, 05:50:45 pm

Thanks very much guys..!!

Title: Re:Centipede CP dimensions
Post by: OSCAR on April 07, 2004, 09:43:21 pm

I traced mine and sketched it up in cad.  Below is a cross section of the cp showing the depth and how it is angled.  If you need any other dimensions, just let me know.

Title: Re:Centipede CP dimensions
Post by: Jakobud on April 08, 2004, 03:29:24 am

Take a look at the Centipede Control Panel overlay I made in the artwork forum if you need to know placement of the buttons and trackball.