Build Your Own Arcade Controls Forum

Main => Artwork => Topic started by: glitch77 on April 05, 2004, 08:21:56 pm

Title: Need some help finishing a CPO *pretty please?*
Post by: glitch77 on April 05, 2004, 08:21:56 pm

I am working on compiling a neat little CPO for a cabinet for my girlfriend (she doesnt quite like Marvel vs. Capcom), and need help finishing it up! All I am really wanting to do is mirror the top part of the galaga marquee to the bottom. I am not skilled enough at Illustrator to do it and make it look good, so I though Id see if someone had a spare few minutes to help out!

Here is a preview .jpg (really bad quility, 287kb):
http://s90796883.onlinehome.us/vectorstuff/galaga-on-atari.jpg

Here is the real .ai file:
http://s90796883.onlinehome.us/vectorstuff/galaga-on-atari.ai

I am just wanting to close up the bottom, to match the top, if possible. The problem is, it is an Atari machine (old dig-dug) and the galaga cpo just doesnt fit on it.

Thanks in advance, it means alot!

Title: Re:Need some help finishing a CPO *pretty please?*
Post by: HaRuMaN on April 07, 2004, 07:27:37 am

I think I can do it... :)  just give me a couple of days and I'll get it back to you.

-Lee

Title: Re:Need some help finishing a CPO *pretty please?*
Post by: glitch77 on April 07, 2004, 09:32:22 am

That would be awesome man! :)

I gave it a tried and true effort yesterday, and I just dont have what it takes yet, let me know what you come up with!

Thanks a ton man!

Title: Re:Need some help finishing a CPO *pretty please?*
Post by: glitch77 on April 10, 2004, 02:05:24 am

Any luck so far?

Title: Re:Need some help finishing a CPO *pretty please?*
Post by: glitch77 on April 17, 2004, 04:41:57 pm

TTT!

Title: Re:Need some help finishing a CPO *pretty please?*
Post by: glitch77 on May 23, 2004, 01:34:08 am

TTT!