Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: tn01 on July 16, 2002, 02:34:01 am

Title: perfect 360 joystick
Post by: tn01 on July 16, 2002, 02:34:01 am

Hey y'all,

I'm considering switching the Happ Ultimate joystick in my homemade playstation controller with a perfect 360. However, I'm not sure how to go about powering the optical sensor (it requires a 5v source). Does anyone have any info on this/ know of any webpages?

Thanx

Title: Re:perfect 360 joystick
Post by: toilet on July 16, 2002, 06:54:22 am

Take a look at http://www.gamesx.com/controldata/psxcont/psxcont.htm (http://www.gamesx.com/controldata/psxcont/psxcont.htm). Pin number 5 VCC is the wire you want to connect the power to. You can just attach a wire to the PCB where that wire comes in, find it with a volt/multimeter. Hope this helps.