Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Thecaver99 on November 06, 2023, 02:33:20 pm

Title: coin mech help
Post by: Thecaver99 on November 06, 2023, 02:33:20 pm

i have a Philips shefras spares limited connected to an ms111 coin mech and having trouble wiring it for the jamma harnes
i have attached the piun out diagram but cant seem to get it to work.

any idea what wires i need to connect up

Title: Re: coin mech help
Post by: grantspain on November 09, 2023, 02:18:32 am

its about 30 years since i wired one of these credit boards up but you only need 3 wires, 12v and ground and the coin line
the 12v goes to any marked 12v and ground goes to any 0v, i am sure coin line goes to n/o output