Build Your Own Arcade Controls Forum

Software Support => GroovyMAME => Topic started by: Diogo on June 18, 2023, 02:49:09 pm

Title: GroovyArcade com jpac fora de sincronismo na tela principal.
Post by: Diogo on June 18, 2023, 02:49:09 pm

Hello... I have a problem: I installed GroovyArcade, I'm using a monitor (electrocian), and to connect to the pc I use a jpac... but when I leave a game... the game selection screen is all messed up and the synchronism light on the jpac goes out.
What can it be? I ask friends for patience because I'm using Google translator. Thank you all.

Title: Re: GroovyArcade com jpac fora de sincronismo na tela principal.
Post by: Calamity on July 01, 2023, 06:11:16 am

Hi Diogo,

If you unplug the usb cable from the jpac and plug it again after a moment, does it sync properly then? If it does, that's a known issue with the jpac.

Title: Re: GroovyArcade com jpac fora de sincronismo na tela principal.
Post by: Diogo on July 03, 2023, 10:00:02 am

It returns to normal when I move the monitor's horizontal trimpot...
I can't adjust the screen of any game because there's always a black band on the left side...even going into the game's own settings (F2) and trying to adjust the grid, there's always a dark band on the left side.
(AMD 5750 1gb video card, a tube I took from a tv, an arcade monitor (from the electromatic brand) and a jpac (with jumpers at 15 and 31khz))
Thank you for answering and trying to help me, I know it's not an easy task because I'm kind of "uncle" for these things and I don't even know how to create a log.
https://www.youtube.com/shorts/sG-51NqnMfg
https://www.youtube.com/shorts/zS5hLISUOBg

Title: Re: GroovyArcade com jpac fora de sincronismo na tela principal.
Post by: Substring on July 03, 2023, 04:11:21 pm

Quote from: Diogo on July 03, 2023, 10:00:02 am

It returns to normal when I move the monitor's horizontal trimpot...
I can't adjust the screen of any game because there's always a black band on the left side...even going into the game's own settings (F2) and trying to adjust the grid, there's always a dark band on the left side.
(AMD 5750 1gb video card, a tube I took from a tv, an arcade monitor (from the electromatic brand) and a jpac (with jumpers at 15 and 31khz))
Thank you for answering and trying to help me, I know it's not an easy task because I'm kind of "uncle" for these things and I don't even know how to create a log.
https://www.youtube.com/shorts/sG-51NqnMfg
https://www.youtube.com/shorts/zS5hLISUOBg

for logs: run gaseutp, go to the troubleshooting menu, and give the link. You need an internet connection