Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: uiucphoenix on December 27, 2022, 12:53:16 am

Title: IPAC-4 Not Registering (Most) Key Presses from Player 1 and 3
Post by: uiucphoenix on December 27, 2022, 12:53:16 am

Hey all, I'm having some trouble with my new 4-Player Control Panel Build on Windows 11. I've wired everything up and the joystick and buttons are not registering for Player 1 and 3. The Coin and Start work, but everything else is not picking up when the switches are pressed. Player 2 and 4 also work with no issues. Has anyone experienced this before?

Title: Re: IPAC-4 Not Registering (Most) Key Presses from Player 1 and 3
Post by: uiucphoenix on December 27, 2022, 11:04:01 am

I got a quick email response from Andy at Ultimarc and tested the switches by connecting a wire to the ground and then touching it to the screw for each control. They were working so I re-ran all of my ground daisy chains and the joystick and buttons started working. My user error, of course!