Build Your Own Arcade Controls Forum

Main => Software Forum => Topic started by: junkcollector8 on September 05, 2022, 05:48:45 pm

Title: Winipac won't map keys properly
Post by: junkcollector8 on September 05, 2022, 05:48:45 pm

Hopefully I'll get this kinda close. I've had a MAME that I bought back in 2013. Worked well up until the other day. I've done no update, changed NOTHING. Its not even connected to a network. After booting Millipede in Hyperspin, the fire button just stopped working. I've tried re-mapping the button but I'm not getting any success. I probably won't way it correctly but I can press the keyboard and see the button "working" on the screen in Winpac. I can even fire using the keyboard. However, I can't get the button to map so that I can fire from the previously assigned button. I tried dis and re-enabling the driver in Control Panel and disconnecting and reconnecting the USB to see if that would work. I have a video here on youtube that visually shows the challenge in case I'm not writing about it properly.
https://youtu.be/LEFN5mj8ons

Title: Re: Winipac won't map keys properly
Post by: Rataplan626 on September 27, 2022, 12:44:16 pm

Couldn't fully watch the video. But if you start notepad or anything you can type some text in, do your buttons do anything?