The NEW Build Your Own Arcade Controls

Main => Lightguns => Topic started by: ViperStrike on August 28, 2022, 04:33:17 pm

Title: Has anyone been able to get an EMS TopGun II to work with Windows 10?
Post by: ViperStrike on August 28, 2022, 04:33:17 pm

Hey Guys,

I just rebuilt my Cabinet after it being dead for a few years.
It used to be Win7 32bit running Maximus Arcade.
Now it's a Win10 64bit machine running Launchbox.

I cannot get the drivers to work at all. I tried a bunch stuff from old posts about going into test mode to register the drivers but they are 32bit.
So I figured I'd ask if anyone had any luck.

Starting to think I should try a Sinden, just trying to avoid spending any money at the moment.

Title: Re: Has anyone been able to get an EMS TopGun II to work with Windows 10?
Post by: kim_sama_999 on August 29, 2022, 03:10:45 am

Just get a Sinden or GUN4IR. The EMS Topgun is too complicated to set up

Title: Re: Has anyone been able to get an EMS TopGun II to work with Windows 10?
Post by: sk8ersublime on August 29, 2022, 01:55:54 pm

I was able to get it working on windows 10 64 but but you have to disable driver signing.

Title: Re: Has anyone been able to get an EMS TopGun II to work with Windows 10?
Post by: ViperStrike on August 29, 2022, 02:50:39 pm

Quote from: sk8ersublime on August 29, 2022, 01:55:54 pm

I was able to get it working on windows 10 64 but but you have to disable driver signing.

I tried that but the drivers I have would not install.

Title: Re: Has anyone been able to get an EMS TopGun II to work with Windows 10?
Post by: sonik on September 01, 2022, 02:45:36 pm

This gun outputs like an guncon2? It's for use on CRT or LCD screen?

Title: Re: Has anyone been able to get an EMS TopGun II to work with Windows 10?
Post by: ViperStrike on September 02, 2022, 03:55:07 pm

It has external sensors so it can work with LCD.

Title: Re: Has anyone been able to get an EMS TopGun II to work with Windows 10?
Post by: sonik on September 05, 2022, 08:34:53 am

If it outputs as a guncon2 then you can try my windows driver.
No need to disable windows driver signature.

Take a look
http://forum.arcadecontrols.com/index.php/topic,166121.0.html

Title: Re: Has anyone been able to get an EMS TopGun II to work with Windows 10?
Post by: ViperStrike on September 09, 2022, 03:39:15 pm

It can't hurt to try, thanks

Title: Re: Has anyone been able to get an EMS TopGun II to work with Windows 10?
Post by: ViperStrike on September 20, 2022, 10:36:48 am

Nothing worked, so I gave up and ordered a Sinden.