Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: SkateDetroit on March 01, 2004, 06:45:44 am

Title: Sega Model 1 to Jamma Adapter???
Post by: SkateDetroit on March 01, 2004, 06:45:44 am

Hey guys,

    I've got a Virtua Fighter that's giving me some grief (Audio Problems). I've looked at the monitor and it is dual res (25 and 15). I'd like to attach a JAMMA harness to the Model 1 harness and stick a shiny new fighting game in there to save the game.

    Does anyone know where I can find a Sega Model 1 to JAMMA adapter? Or does anyone have the pinouts for the Model 1 harnesses, so that I could make my own?

     Thanks!!!

              ~A

Title: Re:Sega Model 1 to Jamma Adapter???
Post by: paigeoliver on March 01, 2004, 07:22:18 am

I wasn't able to find that pinout with a quick search, but you can always simply buy a JAMMA harness and wire that in too.

At one time I had a cocktail that had JAMMA, Konami, City Connection, and Universal harnesses all installed at the same time.

Obviously you only plug in one board at a time.

Title: Re:Sega Model 1 to Jamma Adapter???
Post by: Ken Layton on March 01, 2004, 09:14:28 am

For the pinout try www.arcadehelp.com

For the adapter try www.multigame.com

Title: Re:Sega Model 1 to Jamma Adapter???
Post by: SkateDetroit on March 01, 2004, 09:28:35 am

Paige and Ken,

    Thanks for the replys! Couldn't find any Model 1  info on either of those two sites.

    I figured If I can't find anything I will just get a JAMMA harness and connect it to the Model one harness. Only hang up there is I need the pinouts for the Model 1. :( But I got a feeling someone out there has the info. I've searched the net best I can but I can't come up with the info either.


                Thanks again

              ~A