The NEW Build Your Own Arcade Controls
Arcade Collecting => Restorations & repair => Topic started by: thatpinballguy on July 06, 2022, 02:18:34 pm
-
Good day, I have a 2005 golden tee fore that I am trying to repair. I am hoping to get some guidance to do this. It is a green board. It was working but the old owner had a power surge.
This is what I have come up with so far:
The status 1 led is off.
The status 2 is flashing
IDE led is flashing as well
I borrowed a working set to eliminate possibilities. I was able to get the game to boot and show on screen with his board using my hard drive, my video card and my boot chip.
When I reinstall my board, status 1 light is still off, no boot and nothing on screen. There is a ticking sound through the speakers too. I measured the voltage on the boot chip and I get 5.1v at the first and last pins.
I am not sure what my next step would be to work towards getting this board to boot. Any suggestions would be appreciated?
Brian