Build Your Own Arcade Controls Forum
Main => Buy/Sell/Trade - non-retail => Topic started by: stan2323 on March 30, 2022, 08:51:58 pm
-
I am looking for a P719 neck board and a K7600 chassis board. I think the monitor is good based on the picture below. The lines roll on the camera but they seem to be just flicker a bit to the naked eye. I am not sure what it is but I suspect the two items above. When I boot it on the LCD from the VGA port I get the game that comes up and the red box that said Not Authorized see picture below. I suspect this is the chip in the picture below. I moved the chip and tried to get better contact but that did not work. I have found a post where they said a police trainer chip worked in a STV.
-
No longer need the security chip. I think that is working when I boot through the megajamma board. It boots, you can add coins and play but no picture or guns. I took out the neck board and chassis board and took them to a local person that does repairs. They will be tested and re capped. One thing I noticed is when I discharged the monitor to remove the neck board I did not get the pop you normally do. I made sure to discharge a few time to be safe.
Sent from my iPhone using Tapatalk