Build Your Own Arcade Controls Forum
Arcade Collecting => Restorations & repair => Topic started by: loskiorama on February 20, 2022, 10:31:37 am
-
Hey Guys, I have an original Mortal Kombat 1 cabinet, and I'm having trouble connecting this Jamma to Chamma adapter to my kick harness:
https://www.mikesarcade.com/cgi-bin/store.pl?sku=JA-CHAMMA
The problem is that my kick harness connector has a blocked "socket" as you can see in the picture below: https://i.imgur.com/8ucB7A6.png
I can remove the connector and solder the wires directly to the JAMMA TO CHAMMA board, but I'm not sure which pin corresponds to which cabe
All I know is what each cable represents on my kick harness as this MK1 arcade manual shows https://i.imgur.com/XR89H5P.png, but I need to know this for the adapter as well to make it work.
Any help would be appreciated