Build Your Own Arcade Controls Forum

Main => Driving & Racing Cabinets => Topic started by: fablog on November 28, 2021, 10:42:28 am

Title: Sega cushion clips
Post by: fablog on November 28, 2021, 10:42:28 am

Hi guys,

Do you know where I could buy Sega cushion clips for a sega daytona/nascar/etc... for cheap in Canada? The reference number is 280-K02529-WX.
I'm wondering if an alternative exists!?

Thanks

Title: Re: Sega cushion clips
Post by: lilshawn on November 28, 2021, 02:47:26 pm

yeah they are plastic lugs commonly used in automotive. take a look at your local autoparts store. they often have several sizes/colors to choose from. sometimes called plastic lugs or automotive clips...sometimes fender clips.

Title: Re: Sega cushion clips
Post by: fablog on November 28, 2021, 04:13:09 pm

Thanks lilshawn!

Envoyé de mon LEX722 en utilisant Tapatalk

Title: Re: Sega cushion clips
Post by: codeena on November 28, 2021, 08:55:13 pm

Hi Fablog, where do you get the cushions?

Title: Re: Sega cushion clips
Post by: fablog on November 30, 2021, 07:29:58 pm

Hi Codeena, they came with the cabinet.

I went to an auto store and couldn't find a clip with the good dimensions. Where do you find them guys?


Envoyé de mon LEX722 en utilisant Tapatalk

Title: Re: Sega cushion clips
Post by: lilshawn on December 01, 2021, 03:40:05 pm

Quote from: fablog on November 30, 2021, 07:29:58 pm

I went to an auto store and couldn't find a clip with the good dimensions. Where do you find them guys?

you might have to try a few auto parts stores... these press fit type of clips aren't used much on cars anymore...auto manufacturers have gone to a 2 piece type clip that is releasable, reusable, and less prone to breaking... so these types of press fit clips have fallen out of use and are getting hard to find.

the new style clips would work and look pretty similar once installed... they are measured by the hole they insert into....basically what you want to do is measure your hole... say it's 8mm... you'd look for an 8mm clip. here is a link to a whole pack of different sizes and styles that also shows what size they are. maybe you could see if one of those might work.

https://www.amazon.ca/EZYKOO-Retainer-BumpersCar-Replacement-HondaAccordNissan/dp/B07HD1BZ3X?th=1

an idea anyway.

Title: Re: Sega cushion clips
Post by: fablog on December 01, 2021, 06:04:29 pm

I think you're right. It's too hard to find exactly the same model. It will be much cheaper to change for a press fit type with the right dimensions. Thanks!

Envoyé de mon LEX722 en utilisant Tapatalk

Title: Re: Sega cushion clips
Post by: codeena on December 13, 2021, 04:38:34 pm

Hey fablog, are these what you were looking for?

https://www.arcadeartshop.com/product-tag/280-k02529-wx/

Title: Re: Sega cushion clips
Post by: fablog on December 13, 2021, 11:36:47 pm

Hi Codeena, yeah that's them. I know this website but it's too expensive for a shipping to Canada. I may have find a very similar model in Amazon. I hope it works

https://www.amazon.ca/dp/B06W5QNGS5/ref=cm_sw_r_awdo_navT_g_VTN77Y608WPA70P6AZG1 (https://www.amazon.ca/dp/B06W5QNGS5/ref=cm_sw_r_awdo_navT_g_VTN77Y608WPA70P6AZG1)