Build Your Own Arcade Controls Forum

Arcade Collecting => Arcade1Up & Similar => Topic started by: negative1 on November 24, 2021, 10:48:58 pm

Title: Arcade 1up - Asteroids Partycade Volcano Button Mod
Post by: negative1 on November 24, 2021, 10:48:58 pm

here's a mod using volcano buttons for the asteroids partycade:

(https://i.ibb.co/zPXLmnc/ast-volc-1-2test.jpg) (https://ibb.co/mh9YRDs)
(https://i.ibb.co/CKbCsMQ/ast-volc-floor-volc-1-2test.jpg) (https://ibb.co/k24b69X)
(https://i.ibb.co/k2NRmW8/volc-1-2test.jpg) (https://ibb.co/yFHw4by)

(https://i.ibb.co/6FfJKVX/pcb-close.jpg) (https://ibb.co/w4xrn3c)
(https://i.ibb.co/vwBCq1m/volc-1-2-big.jpg) (https://ibb.co/w0LZgyC)
(https://i.ibb.co/mGX9Fjd/volc-2-big.jpg) (https://ibb.co/SPdt7jH)

came out pretty well also.

later
-1

Title: Re: Arcade 1up - Asteroids Partycade Volcano Button Mod
Post by: CraigP50 on June 10, 2022, 02:27:24 pm

How did you wire the button for it's lights?