Build Your Own Arcade Controls Forum

Software Support => GroovyMAME => Topic started by: Moksi on October 23, 2021, 05:50:57 am

Title: Triple screen crt display with Groovymame install
Post by: Moksi on October 23, 2021, 05:50:57 am

Hello ,
This is my first time installing this software , i aqquired an Beovision MX4000 CRT for use with Mame (mostly Arcade games)
my system is Win 7 64Bit , GPU Radeon R9 380. 
I followed this guys guide for installing Groovymame  https://www.youtube.com/watch?v=7X2xBYgOyUI.
Everything was installed without problems.     
I use an dvi-i port , so with an dvi-i cable to vga - > into the usma scart adapter -> scart to tv .

i also see that that EDID emulation is detecting Output:  Digital_7 DVI-i enabled - GENERIC_15

But i do have one problem unfortunetely i get an triple screen display on the crt

Any help appriciated

Title: Re: Triple screen crt display with Groovymame install
Post by: Moksi on October 23, 2021, 06:04:49 am

settings in video mode

Title: Re: Triple screen crt display with Groovymame install
Post by: Calamity on October 23, 2021, 07:14:01 am

Don't select an output labelled as "Digital" for EDID emulation, it won't work, select the one named "VGA" if it exists (it should).

Title: Re: Triple screen crt display with Groovymame install
Post by: Moksi on October 23, 2021, 11:28:11 am

Yes i had someone helping me out its solved now , the device i set to generic pnp , output set to analog vga. removing the lcd hdmi connected to the gpu
It works

Title: Re: Triple screen crt display with Groovymame install
Post by: Moksi on October 24, 2021, 07:00:04 am

thx