The NEW Build Your Own Arcade Controls

Main => Buy/Sell/Trade - non-retail => Topic started by: 601 Arcades on October 04, 2021, 03:59:44 am

Title: [US/MS/Jackson] WTB- Cinematronics Coindoor Sticker & Electrohome G07 Frame
Post by: 601 Arcades on October 04, 2021, 03:59:44 am

Needing the silver shiny sticker that was made for the Cinematronics coindoors. Someone reproduced them in the early 2000's but I haven't had any luck tracking them down. I've slept quite a few times since then lol. If ya have one laying around, or some extras, DM me please.

Also needing a couple Electrohome G07 19" monitor frames. I have the tubes and chassis, but not enough frames to go around. If you have any spares and wanna sell them, let me know too please.

Thanks!

Title: Re: WTB- Cinematronics Coindoor Sticker & Electrohome G07 Frame
Post by: PL1 on October 04, 2021, 12:38:18 pm

Location?
http://forum.arcadecontrols.com/index.php/topic,87353.0.html (http://forum.arcadecontrols.com/index.php/topic,87353.0.html)


Scott

Title: Re: [US/MS/Jackson] WTB- Cinematronics Coindoor Sticker & Electrohome G07 Frame
Post by: 601 Arcades on October 05, 2021, 01:26:06 pm

Sorry, still learning my way around.

Jackson, MS half the year and Hammond, LA the other half  :laugh2:

Title: Re: [US/MS/Jackson] WTB- Cinematronics Coindoor Sticker & Electrohome G07 Frame
Post by: Arroyo on October 06, 2021, 03:21:17 pm

'Reproduction Cinematronics coin door badges'

https://forums.arcade-museum.com/threads/reproduction-cinematronics-coin-door-badges.476706/

You’ll need to setup an account there to see it if you don’t already have one.

Title: Re: [US/MS/Jackson] WTB- Cinematronics Coindoor Sticker & Electrohome G07 Frame
Post by: 601 Arcades on October 07, 2021, 02:42:11 am

Thank you for that!