Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: tdmame on July 24, 2021, 06:01:28 pm

Title: Hantarex Polo 25 horizontal adjustment
Post by: tdmame on July 24, 2021, 06:01:28 pm

I had the chassis rebuilt and dialed in for NBA Hangtime. I recently installed an Arpicade board and the horizontal needs adjusted (not resized). I'm wondering if the adjustment is on the actual monitor or the remote board? Thanks.

Title: Re: Hantarex Polo 25 horizontal adjustment
Post by: MK3FAN on July 26, 2021, 03:58:45 pm

Your post is contradictory. You need it adjusted and not resized? You mean position or width? Width control is here. The position is on the remote board and should be labeled ‘H.Phase.’

Title: Re: Hantarex Polo 25 horizontal adjustment
Post by: princess prin prin on July 27, 2021, 03:27:01 am

Both position (H. PHASE) and size (H. AMP) are on the remote board. The coil should not be touched.

Title: Re: Hantarex Polo 25 horizontal adjustment
Post by: Ropi Jo on July 27, 2021, 05:36:05 pm

Hey princess... as you appear to know this chassis well can you advise on the V-Pos in this thead...http://forum.arcadecontrols.com/index.php/topic,165384.0.html (http://forum.arcadecontrols.com/index.php/topic,165384.0.html)

Title: Re: Hantarex Polo 25 horizontal adjustment
Post by: tdmame on August 02, 2021, 12:13:38 pm

Quote from: princess prin prin on July 27, 2021, 03:27:01 am

Both position (H. PHASE) and size (H. AMP) are on the remote board. The coil should not be touched.

Thank you!