Build Your Own Arcade Controls Forum

Main => Audio/Jukebox/MP3 Forum => Topic started by: scottydj2 on May 11, 2021, 07:39:06 pm

Title: Built a keypad/display
Post by: scottydj2 on May 11, 2021, 07:39:06 pm

Hi,

Just in case this is of interest to anyone else......

As my hideaway jukebox didn't come with a keyboard/display unit (only an external wall box), I needed a keyboard and display to access the programming mode on the CCC.
As I needed some schematic/PCB practice, I built a little combined keypad display unit as shown below.
The LED's are a bit bright, but only one wire mod was required to bring it to life.
Result! :)

Cheers

Scott

Title: Re: Built a keypad/display
Post by: Zebidee on May 11, 2021, 08:58:36 pm

Nice.

What keyboard/LED unit did you use?