Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: Scotty on March 10, 2021, 11:46:41 am
-
I got the Zebsboards plunger, and I can not seem to get it to work with Pinball Arcade. Buttons work fine, but I can not get the analog plunger to work recognize.
Speaking of the plunger. I calibrated it per the instructions from Zeb. It just seems that it is not accurate in Future or Visual Pinball. If I pull it back just a hair, it might be pretty close to accurate. If I pull it back 1/2 way, it will might shoot it the same amount, less, or a little more. Not consistent at all. If I Pull it back all the way, it will either shoot it and be fine, or slow down right before hitting the ball and not make contact. If I try this 10 times, maybe 3 of the 10 will launch to the top of the playfield. Any idea?
He had a forum on his webpage, with a FAQ, but sadly his page crashed. While it is back the forums did not make it to the new page.
-
I have not used that plunger. I did buy boards from him back in 2014 I believe for my vpin cab to run my toys. I started with a VirtuaPin plunger and was never happy with it so I just use the Launch Ball button. At one point I bought all the supplies to build a Pinscape plunger and then never took the time to build it. All I can offer is this link that has a ton of digital plunger information including for the Pinscape one I was going to use.
http://mjrnet.org/pinscape/BuildGuideV2/BuildGuide.php?sid=plunger (http://mjrnet.org/pinscape/BuildGuideV2/BuildGuide.php?sid=plunger)
-
FWIW Zebsboards is somewhere between absolutely nuthin' and zero to do with me :dunno