The NEW Build Your Own Arcade Controls

Arcade Collecting => Merit/JVL Touchscreen => Topic started by: 1st on March 02, 2021, 08:31:21 pm

Title: Merit Force black touchscreen controllers
Post by: 1st on March 02, 2021, 08:31:21 pm
Does anyone program or know someone that does the black merit 3M touchscreen controllers? I ruined 4 of them by trying to fix a "touchscreen controller error" when I had a, I believe, a 2006.5 ion drive in a force game and I didn't know I was inadvertently corrupting the controller firmware. I think that is the right terms, not positive on the numbers, somewhere there is a merit .pdf on not doing what I did. Thanks
Title: Re: Merit Force black touchscreen controllers
Post by: mahkeymike on March 02, 2021, 08:41:55 pm
Does anyone program or know someone that does the black merit 3M touchscreen controllers? I ruined 4 of them by trying to fix a "touchscreen controller error" when I had a, I believe, a 2006.5 ion drive in a force game and I didn't know I was inadvertently corrupting the controller firmware. I think that is the right terms, not positive on the numbers, somewhere there is a merit .pdf on not doing what I did. Thanks

How many did you ruin? Are you sure its the controller, and not the glass overlay? I can reprogram then, but i dont want to waste my time if its not the problem.
Title: Re: Merit Force black touchscreen controllers
Post by: 1st on March 02, 2021, 09:01:22 pm
Yes, I eventually learned that it was the hard drive so I stopped using it. I read the merit PDFs on testing for shorted screens continuity on pins 3&5 IIRC. I forget offhand it's been a few years but when using a correct force drive and another $40 controller I got it working. I since labeled that drive and key with " do not use". It's not on my priority list. I just know if I try them in known working game I get a "touchscreen controller" error. Again, not high on the priority list I figured someone could do it. I have inspected them under my stereoscope to see if anything looked fried, that's about it. All said can I guarantee anything, no. Thanks
Title: Re: Merit Force black touchscreen controllers
Post by: 1st on March 02, 2021, 09:30:19 pm
http://forum.arcadecontrols.com/index.php?topic=140106.0

 Not sure how to make a link, but similar thread.
I saw they have a usb stick that may fix them?

http://web.archive.org/web/20100106074531/http://www.meritgames.com/Support_Center/Bulletins/PDF/FLDBLL62%20Rev%20A.pdf

Found it, last page 2007 or 2007.5 ion in a force game.

http://www.meritgames.com/Support_Center/Ion%20Aurora/tech_2013.pdf