Build Your Own Arcade Controls Forum

Arcade Collecting => Merit/JVL Touchscreen => Topic started by: bigdan11 on March 01, 2021, 03:38:52 pm

Title: Coin Mech on a JVL Vortex
Post by: bigdan11 on March 01, 2021, 03:38:52 pm

Bought 4 JVL Vortexs. None had coin mechs in them, I tried the electronic mechs we have but will only show the quarter and looinie but not the toonie (Canada) so they aren't programmed for JVL.. I do see there is a mount for a board at the bottom of the mech housing to mount a little sensor board and use a mechanical mech. I bought the only board I could find on the net. I'm wondering if anybody could point me in the direction to get some sensor boards or a electronic mech that is programed for JVL

Title: Re: Coin Mech on a JVL Vortex
Post by: 1st on March 02, 2021, 11:14:43 pm

I saw one posted on c/l on Long Island. I know zero about JVL, never saw one in person.

Title: Re: Coin Mech on a JVL Vortex
Post by: lilshawn on April 26, 2021, 03:36:16 pm

JVL electronic mechs are programmed...

25c- coin line 1
$1 - coin line 2
$2 - coin line 1 and 2 at the same time.

No idea why the did this...but whatever.