Build Your Own Arcade Controls Forum

Main => Project Announcements => Topic started by: Chapel on February 23, 2004, 10:37:40 pm

Title: Nearly Finished UAII Cab
Post by: Chapel on February 23, 2004, 10:37:40 pm

Here's My not quite finished Ultimate Arcade II Cabinet with Slikstik Quad control Panel.  Still Waiting for the WG D9200 to arrive.

Chapel

Title: Re:Nearly Finished UAII Cab
Post by: Chapel on February 23, 2004, 10:40:09 pm

(http://www.ace4.org/chapel/img000046.jpg)

(http://www.ace4.org/chapel/img000048.jpg)


Will post the pics of the Finished Cab when sometime next week when I get it to my house

Chapel

Title: Re:Nearly Finished UAII Cab
Post by: flampoo on February 23, 2004, 11:39:58 pm

Is that a gun taped under the CP? Anyway, it's a good looking cab. I'd love to have one with a large 4P control like that.

Title: Re:Nearly Finished UAII Cab
Post by: Zakk on February 23, 2004, 11:52:50 pm

Like the part near the end in Die Hard!  That cabinet is packin heat!

Title: Re:Nearly Finished UAII Cab
Post by: Zathras on February 24, 2004, 12:42:08 am

Great looking cab and that is one impressive/intimidating cp (with or without the concealed weapon)!


Great job!

Title: Re:Nearly Finished UAII Cab
Post by: Chapel on February 24, 2004, 06:31:59 am

Yeah Thats the ACT Labs Light Gun Taped under there, I dont have a holster yet, does anyone have any suggestions on acquiring or building one?


Thanks!

Chapel

Title: Re:Nearly Finished UAII Cab
Post by: hulkster on February 24, 2004, 07:36:20 am

Quote from: Zakk on February 23, 2004, 11:52:50 pm

Like the part near the end in Die Hard!  That cabinet is packin heat!

 :D HA!  quality statement....just...*sniff* :'(....so beautiful

Title: Re:Nearly Finished UAII Cab
Post by: SNAAAKE on February 24, 2004, 06:29:49 pm

Professional  :)

Title: Re:Nearly Finished UAII Cab
Post by: Zakk on February 24, 2004, 06:45:12 pm

Somebody on here made a holster out of rubber wall edging material.  As I recall it looked pretty good!

Title: Re:Nearly Finished UAII Cab
Post by: Chapel on February 24, 2004, 09:07:59 pm

Great, I'll Search Around Thanks Zakk

BTW Thanks for the compliments, just got my WG D9200 this afternoon,  I'm this close now  ][     ;D



Chapel

Title: Re:Nearly Finished UAII Cab - Update 3-1-04
Post by: Chapel on March 01, 2004, 08:37:24 pm

Finally Finished the Cab, everything is operational just have to figure out how to set up Mamewah and ill be Golden

http://home.comcast.net/~chapel7/chapel.html (http://home.comcast.net/~chapel7/chapel.html)


Chapel

Title: Re:Nearly Finished UAII Cab
Post by: DYNAGOD on March 03, 2004, 02:24:08 pm

http://www.tacticalcity.com/holsters.asp
im sure one of these would work ,
plus it will only add to the intimidation factor being a real holster.

Title: Re:Nearly Finished UAII Cab
Post by: CrazyOleg on March 04, 2004, 04:18:12 am

Your cabinet looks great.  Im in the process of building my own UAII cab with a quad panel from slikstik, pending my tax return :).  I was just wondering how wide did you make your cabinet is and what size is the monitor you are using?
I have finished the bottom portion of my cab but I cant continue until I get my hands on a router  :-\.  I was planning on using a 27in tv as my monitor, hopefully it turns out as good as yours did!

Title: Re:Nearly Finished UAII Cab
Post by: Chapel on March 04, 2004, 06:09:59 pm

I gave up on MAMEWAH, its too difficult for me to set up, might try emuloader or something else a little easier.

I made my cabinet 25.5 inches wide in the inside, but i shoulda made it a even 25 would have made monitor fit a bit more snug, I ended up buying a WG D9200 27" monitor which is 24.5 inches wide.
Good Luck on your Cab Crazy, make sure you post some pics

Chapel

Title: Re:Nearly Finished UAII Cab
Post by: froggerman on March 21, 2004, 03:20:01 am

Quote from: Chapel on February 24, 2004, 06:31:59 am

Yeah Thats the ACT Labs Light Gun Taped under there, I dont have a holster yet, does anyone have any suggestions on acquiring or building one?


Thanks!

Chapel

Has anyone looked at the holsters that Act-Labs offers?

'http://www.act-labs.com/scripts/catdetails.asp?catcode=parts-gun'

It says that these holster's were originally designed for the GS Gun System. I wonder if they fit the new guns or not. I guess we could call their technical support and ask.