Build Your Own Arcade Controls Forum
Main => Raspberry Pi & Dev Board => Topic started by: tar on February 06, 2021, 01:58:21 pm
-
HAVING ISSUES SETTING UP dragons lair 2 on my raspberry in daphne.
--DAPHNE version 1.0.13
--Command line is: /opt/retropie/emulators/daphne/daphne.bin lair2 vldp -nohwaccel -framefile /home/pi/RetroPie/roms/daphne/lair2.daphne/lair2.txt -homedir /opt/retropie/emulators/daphne -fullscreen
--CPU : UnknownCPU 0 MHz || Mem : 0 megs
--OS : Linux 5.4 || Video : Unknown video
--OpenGL: Compiled In
--RGB2YUV Function: C
--Line Blending Function: C
--Audio Mixing Function: C
Setting alternate home dir:
/opt/retropie/emulators/daphne
Set 640x480 at 16 bpp with flags: 20000020
Initializing sound system ...
Joystick #0 was successfully opened
Remapping input ...
Loading compressed ROM image dl2_319.bin...65536 bytes read.
Could not open framefile : /home/pi/RetroPie/roms/daphne/lair2.daphne/lair2.txt
Could not initialize laserdisc player!any ideas or where to look for the answers?
-
Have you checked the file permissions on the frame file? File permissions may have been one of the first things you checked, but those catch me up even after many years of dealing with *nix setups.
-
Does it need an existing DAT file from the PC or can this Pi parse the image?
Does the frame file work on the PC version of Daphne?
-
I'll have to test my setup on the pi. Its been years since I last ran Daphne on the pi, but when I first set it up it didn't take much effort
-
sorry it took me so long to get back .. it ended up being file name of txt file i needed to save as txt file instead i had just right clicked file and renamed